Autoclave

KeyWord：

Category：

Autoclave

Accessories：

HotLine：

+86-18825912847

Inquiry

Autoclave

Autoclave Work Characteristics

● The design pressure in the kettle is high, which is generally 6.0~10.0MPa at present and will exceed 10.0MPa in the future.

● The working medium in the kettle is harsh, mostly flammable, explosive and highly hazardous media.

● The working pressure inside the kettle is high, and it is difficult to seal the stirring device.

● The head of the kettle body adopts the spherical head with the best stress, and the safety margin is larger.

● When the working medium is highly corrosive, stainless steel composite plate or titanium composite plate should be used.

● If the working medium is highly corrosive, it is necessary to use stainless steel composite plate or titanium composite plate material.

● The welding of the inner cylinder of the kettle needs to be preheated, and the welded specimen with the product should be taken.

● The thickness of the material of the inner cylinder of the kettle is large, and it is more difficult to detect the weld ray.

● The whole heat treatment is generally required after welding of the kettle body.

● Pressure resistance test and in most cases gas tightness test are required after heat treatment.

Our Autoclave Eight Technical Advantages

In the process of long-term design and manufacture of high-pressure reactor, our company has widely solicited the opinions of users, constantly improved the structural

design and manufacturing quality of products to better meet the different needs of users, and gradually formed its own technical advantages of products. The technical

advantages of our products have been gradually formed, and some of the core technologies are better than those of the same type of products in the same industry, which are

briefly described as follows:

● The mixing device adopts a double-pivot frame, which makes the mixing operation smoother and reduces the leakage at the sealing place.

● The upper mixing shaft is made of alloy steel, through a combination of heat treatment methods, to obtain excellent comprehensive performance, the local hardness value

of the mixing shaft is more than doubled, the service life of the mixing shaft and the sealing effect is greatly improved.

● Bottom bearing and intermediate bearing can be set in the mixing system according to the user's requirements, which makes the mixing operation smoother and the sealing

leakage further reduced.

● The form of stirring paddle is improved according to the user's need, which reduces the abrasion of material on the wall of kettle body while stirring effectively.

● According to the characteristics of the working medium can be set according to the explosion-proof port and pressure gauge, pressure sensor combination interface,

improve the safety of equipment use.

● The main corner joint on the jacket adopts the combination type with pad plate and reinforcement, which is convenient for inspection and heat treatment, and improves the

structural stress, and enhances the safety of the equipment.

● The main welds of the kettle body are detected by large-energy X-ray flaw detector, and Y-ray detection is avoided as much as possible to ensure the quality of non-

destructive testing.

● Important corner joints on the kettle body are ray-tested instead of the traditional surface non-destructive testing method, and the quality of product manufacturing has

been improved.

None

Online Consultation

Product：

安全验证

Security verification

Submit